2021-7
How to check whether the imported bearing grease is mildewed1. Sunlight methodIn a sunny life, use a screwdriver to remove the grease, and then fly to 45 degrees. Compared with the sun, observe the droplet condition. In the sun, it can be clearly seen that there is no debris in the grease, which can...
2021-7
The disassembly and assembly of imported bearings shall be carried out on time, and the disassembly and replacement of bearings shall be carried out. After disassembly, if it is used again, or the condition of the bearing must be checked, its disassembly and installation shall be the same as the tim...
2021-7
New items of imported bearing working specifications are generally:(1) Clean the bearing and bearing related parts(2) Review the specifications and in-depth processing of relevant parts(3) Installation(4) Inspection after bearing installation(5) Provide lubricant...
2021-7
1. Bearing radial loadThe bearings that mainly bear radial load are radial bearings. The nominal contact angle A0 = 45 0 = br = n-type and nu type cylindrical roller bearings can only bear radial load, and other types of radial bearings can bear both radial load and axial load.2. Axial load of b...
2021-7
Installation method: when using the tight fitting inner ring, the installation method depends on whether the bearing is a straight hole or a conical hole. Then install the lock washer and lock nut or clamp end cap to fix the bearing on the shaft shoulder. After the bearing cools gradually, when the ...
2021-7
1: Stamped steel cage. The stamped steel cage of Timken cylindrical roller bearing is made of low carbon steel through a series of cutting, forming and perforation processes. The cage has various designs and is suitable for general occasions of cylindrical roller bearings. The S-shaped cage for 5200...
2021-7
Inspection during motor operation. During the operation of the motor, carefully check whether the double row angular contact ball bearing has abnormal noise. During inspection, put the head of a screwdriver on the outside of Timken bearing end cover and the handle is attached to the ear. If you hear...
2021-7
Timken deep groove ball bearing was burned. Generally speaking, there are three points: poor lubrication of the bearing; Excessive load of imported bearing; The poor accuracy of shaft and bearing housing is the cause of bearing burns. The following is a detailed introduction to the causes of bearing...
2021-7
Timken thrust bearing can provide good performance when axial load coexists with high speed, heavy load or other severe conditions. Timken offers a range of tea farmers with standard and custom designs that are suitable for most industrial applications.Timken thrust cylindrical roller bearings are s...
2019-2
The working temperature of cylindrical roller bearings depends on many factors, including the heating capacity of all relevant heat sources, the heat flow rate between heat sources and the heat dissipation capacity of the system. Heat sources include bearings, sealing rings, gears, clutches, oil sup...