2021-7
1. Causes of SKF Bearing High Temperature:(1). It is possible that the cooling water of SKF Bearing is interrupted, resulting in high temperature.(2). It is possible that the oil quality of SKF Bearing is deteriorated, the oil itself is not clean or the oil is deteriorated during operation.2. Abnorm...
2021-7
In normal use, the starter bearing (commonly known as copper sleeve) often has loose journal and copper sleeve due to excessive wear, which will eventually affect the service performance of the starter. There are two main reasons why the copper sleeve of starter is easy to wear:First, it bears a lar...
2021-7
The dovetail guide rail sound of imported bearings and the raceway sound of control measures are a kind of sliding and continuous sound generated by the overturning body of non-standard bearings overturning on the dovetail guide rail surface when the single side bearing is running. It is a unique ba...
2021-7
From the analysis of the damage condition of imported bearings, it is found that the structure has the following problems:1. What's wrong with the tightness. In particular, some bearing end caps must be infiltrated with lubricant. When the pH value of lubricant is lower than 6, the bearing will be e...
2021-7
Characteristics of SKF BearingIt can bear radial load and axial load at the same time. The higher the speed is, the greater the contact angle is, the higher the axial bearing capacity is.Single row bearings can only bear axial load in one direction, which will cause additional axial force when beari...
2021-7
When we use SKF bearings, if we find that the temperature is very high, we should stop the operation of the equipment quickly, find out the cause, and deal with it according to the solutions provided above. However, the solutions may be different due to the different causes of bearing heating, so we...
2021-7
SKF supports the growth of the aerospace market and its business by investing in a new automated production line at the SKF aeroengine plant in varanchene, France. Through this investment, SKF is strengthening its flexibility and competitiveness in France.Gothenburg, Sweden, January 21, 2019: SKF ha...
2021-7
When one of the SKF bearings of the four wheels of the vehicle is damaged, you will hear a continuous buzzing - buzzing - buzzing sound in the vehicle while the vehicle is driving. I even feel that the whole car is full of this sound, and the faster the speed is, the louder the sound is. Generally, ...
2019-4
According to foreign media reports, the profit of German bearing manufacturer Schaeffler fell sharply in 2018 due to weak market demand in Europe and China. The company expects that the * * economy will slow down further in the next few years, and the environment facing the * * automobile industry w...
2019-2
When we use the bearing, if we find that the temperature is very high, we should stop the operation of the equipment quickly, find out the cause, and deal with it according to the solutions provided above. However, the solutions may be different due to the different causes of bearing heating, so we ...
2019-2
Grease lubrication is usually suitable for medium and low speed applications where the bearing operating temperature is lower than the limit temperature of grease. No antifriction bearing grease is suitable for all applications. Each grease has only limited performance and characteristics. Grease co...
2019-2
When selecting grease for high temperature applications, thermal stability, oxidation resistance and temperature limit must be considered. In non re lubricating applications, when the operating temperature is above 121 ° C, it is very important to choose refined mineral oil or synthetic oil with sta...
